Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Vitara
    4. : Suzuki Vitara fuse location and diagram

Suzuki Vitara - Video tutorial

Model: Suzuki Vitara ET, MK 1, TA - Years 1988-1998
Part: Fuse box
Operation: Suzuki Vitara fuse location and diagram

Let's see in this guide where to find the fuse boxes and how to find their schematic and diagram of the Suzuki Vitara. First we open the engine hood of our car to access the external fuse box; we find it remove the small plastic cover that we find near the coolant cap (we find the fuse diagram on the cover. Instead we find the internal fuse box on the driver's side, above the pedal board; we use the use and maintenance manual of the vehicle to locate the fuse diagram and amperage!


Posted on 21 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Vitara 2015-2023 - What is the position of the fuse box on the Suzuki Vitara? Read Answer
    • Vitara 2005-2015 - What is the location of the fuse boxes in the Suzuki Vitara? Read Answer
    • Vitara 1988-1998 - Where is the Suzuki Vitara 1992 electric window fuse located? Read Answer
    • Vitara 2005-2015 - Where is the fuse box located in the Suzuki Vitara? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos