Do it yourself
Frequently asked questions about cars and motorcycles

The Correct Way to Lift a Suzuki Swift

Model: Suzuki Swift AZG, MK 5, Rs41 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Checks and maintenance

See other generations:
Video tutorial

There is a correct method to lift your Suzuki Swift safely, both for the vehicle, avoiding damage with unsuitable equipment, and for yourself, preventing injury from the vehicle falling due to an unstable jack. You need to obtain one (preferably two) jacks.

They start from £27.00 on Amazon, and you will also need a pair of axle stands for support (£29.71 for the pair, also on Amazon). There are specific locations to place these devices.

The jacks should be positioned in a special notch located between the two doors. Do not forget to place a rubber pad between metal and metal to prevent paint damage.

The axle stands should be placed at the centre of the vehicle, where the video shows, under plates that represent the strongest part of the vehicle, ensuring that no vital parts are damaged.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

Suzuki Swift (2017-2024 / MK 6, A2L) On the Suzuki Swift, the maintenance interval and oil change reset is done from the instrument cluster. With the Suzuki Swift stationary and the engi…
Suzuki Swift (2017-2024 / MK 6, A2L) If you want to access the OBD2 port inside your Suzuki Swift, simply follow the steps described in this guide. First, open the driver's side door and…
Suzuki Swift (2010-2017 / AZG, MK 5, Rs41) To set the clock on the Suzuki Swift, first turn on the ignition. Once the ignition is on, press both buttons located on the dashboard of the Suzuki …

    Frequently Asked Questions

    • Swift 2017-2024 - How many liters of fuel does the Suzuki Swift have in reserve? Read answer
    • Swift 2010-2017 - How many liters of reserve does the Suzuki Swift have? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos