Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Car Radio in the Suzuki SX4

Model: Suzuki Sx4 MK 1, RW, EY, GY - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Car stereo

See other generations:
Video tutorial

In today's video, see how to replace the original car radio in the Suzuki SX4 with a new modern double DIN unit featuring a touch screen display. This video also applies to the Fiat Sedici.

First, remove the plastic trim surrounding the car radio. Once done, proceed to extract the unit from its location by removing the securing clips and carefully disconnecting the power connector and the antenna.

At this point, install the new unit using the original supports and connect the connectors in their places to finish.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Suzuki SX4?
How to Remove the Radio from a Suzuki SX4?
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) To remove the radio from a Suzuki SX4, use a tool to lever up the chrome trims located to the right and left of the radio. Once these trims are remov…
What is the unlock code for the Suzuki SX4 radio?
What is the unlock code for the Suzuki SX4 radio?
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) To obtain the unlock code for the Suzuki SX4 radio, you need to remove the device from its housing; this will allow you to read the serial number wri…
How to remove the instrument cluster of the Suzuki SX4
How to remove the instrument cluster of the Suzuki SX4
Suzuki Sx4 (2006-2014 / MK 1, RW, EY, GY) Today, let's discover the main instructions to remove and replace the instrument cluster of the Suzuki SX4. First, get inside the vehicle and start b…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos