Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Suzuki
    3. :
  3. Baleno
    4. : How to replace the timing belt on Suzuki Baleno

Suzuki Baleno - Video tutorial

Model: Suzuki Baleno MK 1 - Years 1995-2007
Part: Timing belt
Operation: How to replace the timing belt on Suzuki Baleno

In the video the replacement of the Suzuki Baleno timing belt is carried out with the engine removed; we operate by starting to put the motor in its basic position (2 marks, both on the upper and lower pulley); now we unscrew the screw of the tensioner roller and the pin to reduce the tension of the belt (the belt is tensioned thanks to a spring that we are going to release); at this point we can remove the toothed belt. To reassemble the tensioner roller it is important to correctly position the nose piece in the roller (in the roller there is a small hole where the nose piece must enter), after the tensioning roller has been mounted, we check everything by moving the lever (also the roller must move); we put on the belt starting from the crankshaft pulley, proceeding counterclockwise towards the camshaft sprocket, passing through the tensioner roller and returning to the camshaft pulley. Before reassembling the engine, manually turn it 2 forward revolutions and check the timing.


Posted on 2 November 2022 by ScegliAuto

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos