Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on a Suzuki Swift

Model: Suzuki Swift MK 6, A2L - Years 2017-2024
Part: Clock

To set the clock on your Suzuki Swift, start by turning on the instrument panel without starting the engine. Press and hold the "info" button on the left side of the steering wheel until the settings screen appears. Now, use the button to the right of the speedometer and turn it one click at a time until you reach the "clock" option. Press the "info" button to confirm, then press it again to adjust the time, and the hours will start flashing. Turn it one click at a time to the left or right to adjust the hours; confirm with the "info" button and adjust the minutes in the same way, confirming again with the "info" button. Finally, you can exit by switching off the instrument panel.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on a Suzuki Swift
How to Set the Clock on a Suzuki Swift
Suzuki Swift (2017-2024 / MK 6, A2L) This guide shows you how to adjust the clock on a Suzuki Swift, following the instructions below. First, get in the vehicle and turn on the ignition;…
How to Set the Clock on a Suzuki Swift?
How to Set the Clock on a Suzuki Swift?
Suzuki Swift (2004-2010 / MK 4, Rs41) To set the clock on the Suzuki Swift, turn on the instrument panel by rotating the ignition key in the ignition switch. Once the panel is on, press t…
How to Set the Clock on the Suzuki Swift
How to Set the Clock on the Suzuki Swift
Suzuki Swift (2010-2017 / Rs41, AZG, MK 5) To set the clock on the Suzuki Swift, first turn on the ignition. Once the ignition is on, press both buttons located on the dashboard of the Suzuki …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos