Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the key battery of a Suzuki Aerio

Model: Suzuki Suzuki Various
Part: Key

The procedure for replacing the battery in the remote key of a Suzuki Aerio is quite simple. All you need is a flat-head screwdriver and a new flat CR 2032 battery. Take the key remote and, using the tip of the screwdriver, pry open the top part (short side) to access the casing. At this point, you will have access to the circuit and the battery compartment; proceed to remove the old battery and insert the new one. Close the casing, and the operation is complete.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Suzuki Suzuki Various If your key no longer works, you need to replace the battery. To access the battery on this type of Suzuki key, remove the small screw on it to take …
Suzuki Suzuki Various The previous generation Suzuki vehicles do not have a multifunction remote control but a key. To replace the battery of a Suzuki car key, we need to …
Suzuki Suzuki Various Replacing the battery of a Suzuki key is a very simple and quick operation to perform, especially as it follows the same steps for almost all Suzuki …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos