Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the interior light bulbs of the Suzuki Swift

Model: Suzuki Swift Rs41, AZG, MK 5 - Years 2010-2017
Part: Interior dome light bulb

Let’s see how to replace the interior light bulbs of the Suzuki Swift. First, check the cabin light: use a lever to pry the edge of the transparent lens of the light near the rear-view mirror until it detaches. This gives access to the bulb holder; remove the old bulb and replace it with a new one, then close the transparent lens. Next, move to the light in the boot located on the driver’s side wheel arch; again, use a lever to remove the transparent cover from its housing and disconnect the electrical connector. You will find the bulb to replace inside the cover; swap it for a new one, reconnect the plug, and put it back in its housing. Take this opportunity to install LED bulbs, which are more efficient than the old ones.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Position Light Bulb on a Suzuki Swift Mk4
How to Replace the Position Light Bulb on a Suzuki Swift Mk4
Suzuki Swift (2004-2010 / MK 4, Rs41) This guide shows how to replace the parking light bulb on the Suzuki Swift Mk4. Replacing the position light bulbs is a very simple task. First, open…
Replacement of the license plate lights of the Suzuki Swift
Replacement of the license plate lights of the Suzuki Swift
Suzuki Swift (2004-2010 / MK 4, Rs41) In a few simple steps, we will see the process of disassembling and replacing the license plate lights of the Suzuki Swift. In this case, the disasse…
Replacement of the cabin light bulb in the Suzuki Swift.
Replacement of the cabin light bulb in the Suzuki Swift.
Suzuki Swift (2017-2024 / MK 6, A2L) Shortly, we will see the steps that will allow us to disassemble and replace the interior light fixture of the Suzuki Swift. First, we get inside the…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos