Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Driveshaft Joint on the Suzuki Vitara

Model: Suzuki Vitara FT, GT, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Axle shaft

See other generations:
Video tutorial

Here are the instructions to remove and replace the joint and boot of the front driveshaft on the Suzuki Vitara. First, raise the vehicle and remove the front wheel by unscrewing the bolts; then disconnect the brake caliper from the driveshaft by removing the main pin, as illustrated in the video.

At this point, unscrew the bolts located upstream of the front driveshaft to remove it; then replace the driveshaft boot and joint, installing original parts, applying the reverse procedure for reassembly!


Updated on 13 September 2026 by ScegliAuto


Related tutorials

Suzuki Vitara (2015-2024 / LY) Today's instructions will allow us to disassemble and replace the timing belt of the Suzuki Vitara 1.6 DDiS. First, let's open the hood of the vehicl…
Suzuki Vitara (1988-1998 / MK 1, TA, ET) In this guide, discover the main instructions on how to remove and replace the timing belt on the Suzuki Vitara 1.6. First, open the vehicle's bonnet…
Suzuki Vitara (2015-2024 / LY) Before you can start, exit the cabin of your Suzuki Vitara and head to the external antenna. Begin by unscrewing and removing the long section of the…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos