Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Wide Evo 125
Part: Wheel

Today we will discover the instructions that will allow us to disassemble and remove the rear wheel of the Sym Wide Evo 125 scooter, in simple steps. First, we put the scooter on the center stand and start to disassemble and remove the muffler, unscrewing the fixing screws; then we unscrew the lower arm screws to remove it, then we unscrew the rear wheel nuts, as shown in the video. At this point, if necessary, we replace the tire, finally reassembling the wheel and all other components!

Posted on 23 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Brake Pads on the Sym Wide Evo 125
Replacing the Front Brake Pads on the Sym Wide Evo 125
Wide Evo 125 In this video tutorial, you will see how to disassemble and replace the front brake pads on the Sym Wide Evo 125 scooter. First, put your scooter on …
How to Replace the Transmission of the Sym Wide Evo 125?
How to Replace the Transmission of the Sym Wide Evo 125?
Wide Evo 125 To replace the transmission of the Sym Wide Evo 125, loosen the screws securing the cover located near the rear wheel on the left side of the bike. O…
How to Replace the Levers on a Sym Wide Evo 125
How to Replace the Levers on a Sym Wide Evo 125
Wide Evo 125 To replace the levers on a Sym Wide Evo 125, loosen the bolts securing the front fairing. These bolts are located near the front headlight and above …

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos