Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Gts 300i
Part: Air filter

Change the engine air filter on a Sym Gts 300i scooter. Follow this guide to proceed with the change. Position the scooter on the centre stand. Using a screwdriver, unscrew the securing screws of the air filter housing. After removing the securing screws, uncover the cap and remove the air filter. Install a new one if damaged, or reposition the old one after cleaning it (use an air compressor). Finally, close the air filter housing and tighten the screws on either side.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the coolant in the Sym GTS 300i
How to replace the coolant in the Sym GTS 300i
Gts 300i In this guide, we will see the instructions that will allow you to replace the coolant in the Sym GTS 300i scooter. First, place your scooter on the …
Removing the Rear Wheel of Sym GTS 300i
Removing the Rear Wheel of Sym GTS 300i
Gts 300i In this tutorial video, you will learn how to remove the rear wheel of a Sym GTS 300i scooter. First, remove the fixing screws of the exhaust silence…
How to Replace the Coolant in the Sym GTS 300i
How to Replace the Coolant in the Sym GTS 300i
Gts 300i This guide will show you the steps to replace the coolant in the Sym GTS 300i scooter. First, place your scooter on the centre stand and remove the p…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos