Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Gts 150

Model: Sym Gts 150
Part: Battery

Today, we will see how to remove and replace, in simple steps, the battery of a Sym GTS 150cc. First, remove the rear footrest and take off the plastic fairing by removing the side fixing screws; then remove the battery cover by unscrewing the additional screws, and access the battery by disconnecting the screws of the two terminals (positive and negative), as shown in the video. Extract the battery and replace it with the new one, first securing the battery holder and then installing the battery itself: follow the video to the end!

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Sym GTS 250i
How to replace the battery of the Sym GTS 250i
Gts 250 These brief steps will show us how to disassemble and replace the battery of the Sym GTS 250i scooter. First of all, we put the scooter on the center…
How to replace the coolant in the Sym GTS 300i
How to replace the coolant in the Sym GTS 300i
Gts 300i In this guide, we will see the instructions that will allow you to replace the coolant in the Sym GTS 300i scooter. First, place your scooter on the …
Engine Oil and Spark Plug Replacement on Sym GTS 200
Engine Oil and Spark Plug Replacement on Sym GTS 200
Gts 200 In today's tutorial video, you will see instructions on how to replace the engine oil while performing the regular maintenance service, and how to re…

How to Replace the Rear Brake Pads on the Triumph Street Triple 765 RS?

In this tutorial, see how to replace the rear brake pads on the Triumph Street Triple 765 RS, a very simple and quick operation. Start by positioning yourself in front of the brake in question, then grip the caliper and press it firmly against the disc to compress the piston. Once done, release the indicated clip, remove the upper pin, and separate the old pads from the caliper. At this point, clean any dirt residue, insert the replacement pads, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos