Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Belt on the Sym GTS 125?

Model: Sym Gts 125
Part:

This video is currently unavailable

To replace the belt on the Sym GTS 125, you need to loosen the screws that secure the transmission cover, located near the rear wheel on the left side of the scooter. Once the cover has been removed, you will have access to the underlying components by unscrewing the central pin of the clutch and the variator.

When these two parts have been removed, you can also detach the corresponding belt to replace it with a new spare part. After the replacement, reassemble all the components that were removed earlier.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Remove the Variator from the Sym GTS 125
How to Remove the Variator from the Sym GTS 125
Gts 125 In today's tutorial video, you will learn how to remove and replace the variator, as well as the drive belt, of the Sym GTS 125 scooter. First, posit…
How to Replace the Rear Brake Pads on the Sym GTS 125
How to Replace the Rear Brake Pads on the Sym GTS 125
Gts 125 Today's instructions will show you how to remove and replace the rear brake pads on the Sym GTS 125 scooter, as well as the GTS 300. First, place you…
How do you replace the air filter of the Sym GTS 125?
How do you replace the air filter of the Sym GTS 125?
Gts 125 In order to replace the air filter of the Sym GTS 125, you will need to loosen the screws that hold the corresponding filter box: this will be locate…

How to Change the Engine Oil of a Harley Davidson Sportster

Changing the engine oil of a Harley Davidson Sportster requires a few simple operations performed with care. Start by positioning the bike securely, preferably using a centre stand or suitable support. Locate the oil drain plug under the engine and place a container to collect the used fluid. After removing the plug, allow the oil to drain completely, waiting a few minutes for all the fluid to be expelled. Once emptied, reinsert the plug and ensure it is tightly screwed in. At this point, locate the oil filler cap, unscrew it, and pour in the recommended quantity and type of oil as specified by the manufacturer. Check the level using the dipstick or built-in indicator, adjusting the quantity if necessary. After finishing, briefly start the engine to allow the oil to circulate, then check the level again to ensure it is correct.

Watch the video!


by ScegliAuto

More videos