Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sym Gts 125
Part: Air filter

In order to replace the air filter of the Sym GTS 125, you will need to loosen the screws that hold the corresponding filter box: this will be located at the back of the bike near the rear wheel on the left side. Once the box has been opened, you can remove the air filter inside to insert the new replacement piece; after the new filter has been inserted, you can close the box by tightening the screws and ensure that everything is functioning correctly.

Posted on 19 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Gts 125 Today's instructions will show us how to disassemble and replace the rear brake pads of the Sym GTS 125 scooter, but also of the GTS 300. First of al…
Gts 125 To dismantle the engine of the Sym GTS 125, you must completely remove the engine from its housing: to do this, you will need to take off the compone…
Gts 125 To replace the belt on the Sym GTS 125, you need to loosen the screws that secure the transmission cover, located near the rear wheel on the left sid…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos