Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sym Gts 125
Part:

In today's tutorial video, you will learn how to remove and replace the variator, as well as the drive belt, of the Sym GTS 125 scooter. First, position your scooter on the centre stand and start by unscrewing the screws of the clutch cover; once the cover is removed, unscrew the nut of the clutch bell and the fan to take them off, as shown in the video. At this point, remove the drive belt and then the variator; replace the components with the original ones and reassemble everything, following the tutorial video to the end!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Gts 125 Today's instructions will show us how to disassemble and replace the rear brake pads of the Sym GTS 125 scooter, but also of the GTS 300. First of al…
Gts 125 To dismantle the engine of the Sym GTS 125, you must completely remove the engine from its housing: to do this, you will need to take off the compone…
Gts 125 In order to replace the air filter of the Sym GTS 125, you will need to loosen the screws that hold the corresponding filter box: this will be locate…

How to Replace the Key Battery on a BMW R1250GSA

To replace the key battery on your BMW R 1250 GSA, start by locating the opening slot on the key. Once you have found the slot, use a small screwdriver or a coin to carefully pry open the key. Find the existing battery and remove it carefully. Ensure you insert the new battery with the correct polarity. Close the key securely and check that it is properly sealed. Finally, test the key to ensure it works correctly. If in doubt, consult the owner's manual for detailed instructions.

Watch the video!


by ScegliAuto

More videos