Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Brake Pads on the Sym GTS 125

Model: Sym Gts 125
Part: Brake pads

Video tutorial

Today's instructions will show you how to remove and replace the rear brake pads on the Sym GTS 125 scooter, as well as the GTS 300. First, place your scooter on the centre stand and begin unscrewing the two fixing screws of the rear brake caliper; remove the caliper from the disc and press the caliper piston to extract the old brake pads, as shown in the video.

At this point, clean the caliper of any residual dirt and install the new original brake pads, finally refitting the rear brake caliper!


Updated on 3 October 2026 by ScegliAuto


Related tutorials

Gts 125 In today's tutorial video, you will learn how to remove and replace the variator, as well as the drive belt, of the Sym GTS 125 scooter. First, posit…
Gts 125 To dismantle the engine of the Sym GTS 125, you must completely remove the engine from its housing: to do this, you will need to take off the compone…
Gts 125 To replace the belt on the Sym GTS 125, you need to loosen the screws that secure the transmission cover, located near the rear wheel on the left sid…

How to Change the Engine Oil and Oil Filter of the Triumph Speed Triple 1050

Today, let's see how to perform routine maintenance by changing the engine oil and oil filter on the Triumph Speed Triple 1050. First, place your bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter cartridge, as shown in the video. At this point, screw on and gently tighten the new oil filter, and finally top up with new oil!

Watch the video!


by ScegliAuto

More videos