Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Gts 200

Model: Sym Gts 200
Part: Engine oil

In today's tutorial video, you will see instructions on how to replace the engine oil while performing the regular maintenance service, and how to replace the spark plug on a Sym GTS 200 scooter. First, position your scooter on the centre stand and unscrew the oil drain bolt using a socket spanner; then let all the oil drain into a container and open the top cap to allow it to flow out more quickly. After that, replace the bolt and fill in the new engine oil through the designated top hole; follow the video to the end for the spark plug replacement!

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Tyre on a Sym Voyager GTS 125
How to Replace the Rear Tyre on a Sym Voyager GTS 125
Voyager Gts 125 In today's tutorial video, you will see the instructions for removing and replacing the rear wheel and tyre of the Sym Voyager GTS 125 scooter. First…
How to Change the Engine Oil of the Sym HD 200
How to Change the Engine Oil of the Sym HD 200
Hd 200 Evo Today, follow these step-by-step instructions to change the engine oil and oil filter of the Sym HD 200 scooter. First, place the scooter on its cent…
How to Change the Transmission Oil of the Sym Jet 14 200
How to Change the Transmission Oil of the Sym Jet 14 200
Jet 14 200 In this brief guide, we will see the instructions that will allow us to change the transmission oil of the Sym Jet 14 200 scooter. First, place the s…

How to Remove the Handlebar Ends and Mirrors on the Royal Enfield Interceptor 650

This guide shows how to remove the handlebar ends and replace the mirrors on the Royal Enfield Interceptor 650. The first step is to unscrew the bolt holding the handlebar end in place using an Allen key. Once the bolt is removed, carefully pull out the finishing block. Take the replacement finishing block and, after loosening the fixing hex bolt, insert it into position and tighten it. Install the mirrors at the end of the element and tighten the mirror fixing bolt. Make the necessary adjustments to ensure proper rear visibility.

Watch the video!


by ScegliAuto

More videos