Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Jet14 200
Part: Spark plugs

In order to replace the spark plug of the Sym Jet14 200, you need to loosen the screws that secure the panel located in the rear area of the footrest compartment: once this panel has been removed, you will be able to locate the ignition coil connected to the top of the cylinder. By disconnecting the coil, you will be able to locate the spark plug underneath, which must be removed from its seat using the appropriate socket wrench. After the old spark plug has been removed, you can then insert the new one, in order to verify that everything is functioning correctly.

Posted on 26 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Sym Jet14 200
How to Reset the "Service" Light on a Sym Jet14 200
Jet14 200 Before you begin, sit on the seat of your Sym Jet14 200. Start by activating the instrument panel by turning the key in the ignition switch. Next, pr…
How to replace the front mudguard of the Sym Jet14 200
How to replace the front mudguard of the Sym Jet14 200
Jet14 200 Follow the main steps to remove and replace the front mudguard of the Sym Jet14 200 scooter, as outlined below. First, place your scooter on the cent…
How to Replace the Belt and Variator on the Sym Jet14 200
How to Replace the Belt and Variator on the Sym Jet14 200
Jet14 200 This guide briefly explains how to disassemble and replace the belt and variator on the Sym Jet14 200 scooter. First, place your scooter on the centr…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos