|
Do it yourself
| |||
| ||||
How to replace the front mudguard of the Sym Jet14 200
Model: Sym Jet14 200
Video tutorial
Follow the main steps to remove and replace the front mudguard of the Sym Jet14 200 scooter, as outlined below. First, place your scooter on the centre stand and start unscrewing the fixing screws of the front mudguard, found on both the right and left sides; then gently detach the mudguard from the front fork, as shown in the video. At this point, install the new mudguard after painting it, applying the reverse procedure of disassembly!
Updated on 10 July 2026 by ScegliAuto
Related tutorials
Jet14 200
Before you begin, sit on the seat of your Sym Jet14 200. Start by activating the instrument panel by turning the key in the ignition switch. Next, pr…
Jet14 200
This guide briefly explains how to disassemble and replace the belt and variator on the Sym Jet14 200 scooter. First, place your scooter on the centr…
Jet14 200
To replace the spark plug on the Sym Jet14 200, you need to loosen the screws that secure the panel located at the rear of the footwell: once this pa…
|
How to replace the piston on a Derbi Senda 125?
To replace the piston on a Derbi Senda 125, completely remove the seat and take off all parts above the engine block. Next, disconnect the connectors and unscrew the bolts securing the cylinder to the top of the block, locating the piston inside. Remove the old piston from its connecting rod by loosening the retaining ring, and replace it with a new spare part. Finally, reassemble all the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.045
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |