Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before you begin, sit on the seat of your Sym Jet14 200. Start by activating the instrument panel by turning the key in the ignition switch. Next, press and hold the left button on the instrument panel until the "Service" light turns off. Once the service light is off, release the button and turn off the instrument panel. After completing this step, you will have successfully reset the "Service" light on your Sym Jet14 200.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front mudguard of the Sym Jet14 200
How to replace the front mudguard of the Sym Jet14 200
Jet14 200 Follow the main steps to remove and replace the front mudguard of the Sym Jet14 200 scooter, as outlined below. First, place your scooter on the cent…
How to Replace the Belt and Variator on the Sym Jet14 200
How to Replace the Belt and Variator on the Sym Jet14 200
Jet14 200 This guide briefly explains how to disassemble and replace the belt and variator on the Sym Jet14 200 scooter. First, place your scooter on the centr…
How do you replace the spark plug of the Sym Jet14 200?
How do you replace the spark plug of the Sym Jet14 200?
Jet14 200 In order to replace the spark plug of the Sym Jet14 200, you need to loosen the screws that secure the panel located in the rear area of the footrest…

How to Replace the Brake Lever of the Honda SH 125i?

To replace the brake lever of the Honda SH 125i, access the nut located at the bottom of the lever, where it is fixed to the handlebar. This nut needs to be loosened to remove the bolt it is attached to: by removing this bolt, you will be able to free the lever and remove it completely. Once the old lever is removed, insert the new one, securing it in place by inserting the bolt and the corresponding nut; then check that the brake functions correctly.

Watch the video!


by ScegliAuto

More videos