Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Belt and Variator on the Sym Jet14 200

Model: Sym Jet14 200
Part:

Video tutorial

This guide briefly explains how to disassemble and replace the belt and variator on the Sym Jet14 200 scooter. First, place your scooter on the centre stand and start unscrewing the fixing screws located on the sides of the transmission cover to remove it; then unscrew the nut of the fan and clutch bell, as shown in the video.

At this point, remove the belt and then the variator, replacing the components with new ones; finally, reassemble everything, following the video tutorial to the end!


Updated on 28 May 2026 by ScegliAuto


Related tutorials

Jet14 200 Before you begin, sit on the seat of your Sym Jet14 200. Start by activating the instrument panel by turning the key in the ignition switch. Next, pr…
Jet14 200 Follow the main steps to remove and replace the front mudguard of the Sym Jet14 200 scooter, as outlined below. First, place your scooter on the cent…
Jet14 200 To replace the air filter on the Sym Jet14 200, you need to loosen the bolts securing the cover that contains the air filter. This cover is located n…

How to replace the piston on a Derbi Senda 125?

To replace the piston on a Derbi Senda 125, completely remove the seat and take off all parts above the engine block. Next, disconnect the connectors and unscrew the bolts securing the cylinder to the top of the block, locating the piston inside. Remove the old piston from its connecting rod by loosening the retaining ring, and replace it with a new spare part. Finally, reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos