Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sym Vts 200
Part: Spark plugs

In today's video, you will see how to remove and replace the engine spark plug on a Sym VTS 200 scooter, as well as on other models from the manufacturer, in simple steps. First, remove the plastic side covers located at the bottom; then disconnect the cable or cap from the spark plug and use a socket wrench to unscrew it, as shown in the video. At this point, replace it with a new one of the correct type, screwing it in by hand first; then tighten it with a torque wrench, if possible, and reconnect the spark plug cable!

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Vts 200 Follow the steps necessary to remove and replace the drive belt on the Sym VTS 200 scooter. First, place your scooter on the centre stand and start u…
Vts 200 To replace the air filter on a Sym VTS 200, you need to loosen the screws that secure the cover of the air filter box, located directly above the gea…
Vts 200 In this tutorial, we will see how to replace the engine oil in the SYM VTS 200 scooter, a very simple and quick operation. First, let's make sure tha…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos