Do it yourself
Frequently asked questions about cars and motorcycles

Model: Sym Vf3i
Part: Engine oil

Do you want to change the oil on the scooter? Here’s how to remove the oil filter and change the oil on a Sym Vf3i scooter. Secure the scooter on the centre stand and start by removing the air filter. Unscrew the securing bolt of the container located under the engine. Allow the oil to drain into a container. Once drained, you can screw the oil bolt back in. Use a strap wrench to unscrew the oil filter if it’s a large filter, otherwise use a socket wrench for a mesh filter. Replace all filters. Refill with the new oil recommended by the manufacturer. Check the engine oil level after refilling.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Vf3i In this tutorial we can see how to replace the motor oil in the SYM VF3i scooter, a very simple and fast operation. First of all, make sure that the …
Vf3i This tutorial shows how to reset the oil service on a SYM VF3i 185 scooter, a very simple and quick operation to perform only after completing the re…
Vf3i In this video we can see where the spark plug is located in the SYM VF3i scooter and how to proceed in case we need to replace it, a very simple and …

How to Change the Speed Unit on the Piaggio Mp3

If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes.

Watch the video!


by ScegliAuto

More videos