Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Sym Gts 300i
Part: Wheel

Today, you will see a very simple step, which is replacing the front wheel on the Sym GTS 300. As shown in the video, before proceeding, place a support under the scooter. On the right side of the front wheel, loosen the two screws holding the wheel support, then move to the left side and unscrew the bolts securing the brake caliper to the disc. Before completely removing it, remember to disconnect the cable, then return to the right and fully unscrew the central axle. Done! At this point, you can manually remove the wheel from the scooter. Good luck!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Wheel of Sym GTS 300i
Removing the Rear Wheel of Sym GTS 300i
Gts 300i In this tutorial video, you will learn how to remove the rear wheel of a Sym GTS 300i scooter. First, remove the fixing screws of the exhaust silence…
How to Replace the Front Bulbs on a SYM GTS Evo Scooter
How to Replace the Front Bulbs on a SYM GTS Evo Scooter
Gts 300i Replacing the front headlight bulbs on a SYM GTS Evo scooter is a very simple and quick task. As shown, there is no need to remove any parts as the b…
How to replace the coolant in the Sym GTS 300i
How to replace the coolant in the Sym GTS 300i
Gts 300i In this guide, we will see the instructions that will allow you to replace the coolant in the Sym GTS 300i scooter. First, place your scooter on the …

Replacing the Headlight Bulb on the Yamaha Mio 125

This brief guide will show you how to remove and replace the headlight bulb on the Yamaha Mio 125 scooter in simple and quick steps. First, place the scooter on the centre stand and begin to remove the front headlight; to do this, unscrew the fastening screws located at the bottom and disconnect the electrical connector of the light found at the back, as illustrated in the video. At this point, remove and replace the bulb with a new one of the correct type and with the same fitting; finally, reassemble the front headlight with its front fairing!

Watch the video!


by ScegliAuto

More videos