Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on the Sym Gts 300i

Model: Sym Gts 300i
Part: Brake pads

Video tutorial

In today's tutorial video, you will learn how to remove and replace the front brake pads on the Sym Gts 300i scooter. First, place the scooter on its stand and start by unscrewing the two fixing screws of the front brake caliper using a socket spanner; then lever inside the caliper to retract the piston, thereby removing the old brake pads.

At this point, clean the caliper of dirt and install the new brake pads; then reassemble everything by applying the reverse procedure!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

Removing the Rear Wheel of Sym GTS 300i
Removing the Rear Wheel of Sym GTS 300i
Gts 300i In this tutorial video, you will learn how to remove the rear wheel of a Sym GTS 300i scooter. First, remove the fixing screws of the exhaust silence…
How to replace the coolant in the Sym GTS 300i
How to replace the coolant in the Sym GTS 300i
Gts 300i In this guide, we will see the instructions that will allow you to replace the coolant in the Sym GTS 300i scooter. First, place your scooter on the …
How to Replace the Coolant in the Sym GTS 300i
How to Replace the Coolant in the Sym GTS 300i
Gts 300i This guide will show you the steps to replace the coolant in the Sym GTS 300i scooter. First, place your scooter on the centre stand and remove the p…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos