Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. :
  3. Jet X 125
    4. : How do I replace the Sym Jet X 125 battery?

Model: Sym Jet X 125
Part: Battery
How do I replace the Sym Jet X 125 battery?

In order to replace the battery of the Sym Jet X 125 you need to remove the cover of the footrest compartment of the motorcycle, so that you can access the screws that fix the side panel. Once these screws have been loosened, it will be possible to access the components inside: the battery will be accessible after removing the plastic cover placed above it. In this way it will be possible to go and disconnect the power cables and remove it from inside its housing: after removal, the new one can be inserted, fitting all the removed components.


Posted on 16 May 2024 by ScegliAuto



How do you replace the transmission of the Sym Jet X 125?
Jet X 125 In order to replace the transmission of the Sym Jet X 125 it is necessary to loosen the bolts that fix the casing located at the rear wheel, on the l
How do I adjust the shock absorbers of the Sym Jet X 125?
Jet X 125 In order to adjust the shock absorbers of the Sym Jet X 125 you must use the screwdriver that is supplied when you purchase the bike. The screwdriver
How to reset the oil service on the SYM Jet X scooter?
Jet X 125 Resetting the oil service on the SYM Jet X scooter, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we

Change the Triumph Bonneville engine oil and oil filter

In this guide, we are going to carry out the routine maintenance coupon, replacing the engine oil and oil filter, of the Triumph Bonneville motorcycle. First of all we put the central stand to our motorbike and we begin to unscrew the oil vent bolt that we find under the engine, letting it drain in a container for about ten minutes; then unscrew the oil filter cartridge, using the appropriate wrench, screwing the new one by hand and gently tightening. Finally, unscrew the filler cap and top up with the new oil, having the right viscosity!

Watch the video!


by ScegliAuto

More videos