Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil of the Sym Jet X 125?

Model: Sym Jet X 125
Part: Engine oil

Video tutorial

The engine oil of the Sym Jet X 125 can be completely replaced by unscrewing the drain plug located in the central lower part of the vehicle: once this plug has been removed, it will be possible to proceed by draining all the used oil into a properly positioned container.

Then, the oil filter in this position can be removed to replace it with a new one. At the end of the procedure, it will be necessary to top up with the necessary amount of oil, by inserting it through the vent located on the right side of the motorcycle.


Posted on 18 October 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Sym Jet X 125?
How to Change the Engine Oil of the Sym Jet X 125?
Jet X 125 You can change the engine oil of the Sym Jet X 125 by loosening the drain plug of the oil sump, which is located at the central bottom of the scooter…
Resetting the engine oil change indicator light (service) of the Sym Jet X 125.
Resetting the engine oil change indicator light (service) of the Sym Jet X 125.
Jet X 125 This guide will show us the procedure for resetting the engine oil change indicator light (service) of the Sym Jet X 125 scooter. First, we put the s…
Resetting the engine oil light on the Sym Jet X 125.
Jet X 125 These brief instructions will show us how to reset the maintenance service light of the engine oil change for the Sym Jet X 125 scooter. First, put t…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos