Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil of the Sym Jet X 125?

Model: Sym Jet X 125
Part: Engine oil

Video tutorial

You can change the engine oil of the Sym Jet X 125 by loosening the drain plug of the oil sump, which is located at the central bottom of the scooter: once the plug is removed, you can let all the used oil flow into a suitably placed container. At this point, you can also remove the oil filter, which is also in the same position: then you can insert the new filter and proceed with the top-up. You will need to pour the required amount of oil through the breather on the right side of the scooter.


Posted on 23 May 2026 by ScegliAuto


Related tutorials

Jet X 125 The engine oil of the Sym Jet X 125 can be completely replaced by unscrewing the drain plug located in the central lower part of the vehicle: once th…
Jet X 125 This guide will show us the procedure for resetting the engine oil change indicator light (service) of the Sym Jet X 125 scooter. First, we put the s…
Jet X 125 These brief instructions will show us how to reset the maintenance service light of the engine oil change for the Sym Jet X 125 scooter. First, put t…

How to replace the piston on a Derbi Senda 125?

To replace the piston on a Derbi Senda 125, completely remove the seat and take off all parts above the engine block. Next, disconnect the connectors and unscrew the bolts securing the cylinder to the top of the block, locating the piston inside. Remove the old piston from its connecting rod by loosening the retaining ring, and replace it with a new spare part. Finally, reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos