Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the engine oil light on the Sym Jet X 125.

Model: Sym Jet X 125
Part: Service warning light

This video is currently unavailable

These brief instructions will show us how to reset the maintenance service light of the engine oil change for the Sym Jet X 125 scooter. First, put the scooter on the center stand and start the instrument panel by turning the key to position one; then press the button on the right side of the panel, waiting for the maintenance warning light to reset completely, as shown in the video.

At this point, turn off the panel and then start the engine, having reset the service light!


Posted on 10 July 2025 by ScegliAuto


Related tutorials

Resetting the engine oil change indicator light (service) of the Sym Jet X 125.
Resetting the engine oil change indicator light (service) of the Sym Jet X 125.
Jet X 125 This guide will show us the procedure for resetting the engine oil change indicator light (service) of the Sym Jet X 125 scooter. First, we put the s…
How to Change the Engine Oil of the Sym Jet X 125?
How to Change the Engine Oil of the Sym Jet X 125?
Jet X 125 You can change the engine oil of the Sym Jet X 125 by loosening the drain plug of the oil sump, which is located at the central bottom of the scooter…
How do you replace the engine oil of the Sym Jet X 125?
How do you replace the engine oil of the Sym Jet X 125?
Jet X 125 The engine oil of the Sym Jet X 125 can be completely replaced by unscrewing the drain plug located in the central lower part of the vehicle: once th…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos