Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Mask 50
This tutorial shows how to replace the front headlight bulbs on the Sym Mask 50 scooter, a very simple and quick operation. Before proceeding, ensure the key is not in the ignition for safety. For the position light, simply grasp the relevant bulb holder from inside the wheel arch, unscrew it slightly, and pull it out of the housing. For the main bulb, you will need to unscrew the screws of the front panel, remove it, and disconnect the internal connector. Once this is done, just unclip the metal clip and pull the bulb out of the headlight.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Bulbs on a SYM GTS Evo Scooter
How to Replace the Front Bulbs on a SYM GTS Evo Scooter
Gts 300i Replacing the front headlight bulbs on a SYM GTS Evo scooter is a very simple and quick task. As shown, there is no need to remove any parts as the b…
How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?
How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?
Bonus 110 As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the k…
How to Replace the Front Headlight Bulbs on an Aprilia SR 50 Scooter
How to Replace the Front Headlight Bulbs on an Aprilia SR 50 Scooter
Rs 50 This tutorial shows how to replace the front headlight bulbs on an Aprilia SR 50 scooter, a very simple and quick operation. First, ensure the key is…

How to Perform Routine Maintenance on the Malaguti Phantom F12

The instructions in this video will show you how to carry out the routine maintenance service on the Malaguti Phantom F12 50 scooter. First, place the scooter on its centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then check the condition of the brakes and replace them if necessary, as shown in the video. At this point, unscrew the screws of the transmission cover to check the condition of the belt, replacing it if necessary!

Watch the video!


by ScegliAuto

More videos