Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Bulbs on a SYM GTS Evo Scooter

Model: Sym Gts 300i
Part: Headlight bulb

Video tutorial

Replacing the front headlight bulbs on a SYM GTS Evo scooter is a very simple and quick task. As shown, there is no need to remove any parts as the bulbs are accessible from inside the wheel arch.

Of course, space will be limited, and you will need to turn the wheel in the opposite direction to the bulb you are replacing. Once you have extracted the bulb holder by turning it counterclockwise, disconnect the power connector and install the replacement bulb, taking care not to touch it directly with your bare hands.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

How to replace the coolant in the Sym GTS 300i
How to replace the coolant in the Sym GTS 300i
Gts 300i In this guide, we will see the instructions that will allow you to replace the coolant in the Sym GTS 300i scooter. First, place your scooter on the …
How to Replace the Front Brake Pads on the Sym Gts 300i
How to Replace the Front Brake Pads on the Sym Gts 300i
Gts 300i In today's tutorial video, you will learn how to remove and replace the front brake pads on the Sym Gts 300i scooter. First, place the scooter on its…
How to Replace the Coolant in the Sym GTS 300i
How to Replace the Coolant in the Sym GTS 300i
Gts 300i This guide will show you the steps to replace the coolant in the Sym GTS 300i scooter. First, place your scooter on the centre stand and remove the p…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos