Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sym
    3. : Joyride 150

Where is the Battery Located on the SYM Joyride 150 Scooter?

Model: Sym Joyride 150
Part: Battery

This video is currently unavailable

In this video, we can see where the battery is located on the SYM Joyride scooter and how to access it if you need to recharge or replace it. As shown, it is positioned in the lower right area of the scooter, and to gain access, you must first remove the panel in the same position.

Once done, unscrew the fixing bolt of the black plastic cover and open it. At this point, you can proceed with either replacing the battery or recharging it, depending on your needs.

In any case, always ensure to connect the positive terminal first.


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rollers in the Variator of the Sym Joyride 200
Joyride 200 In today's video, you will see how to disassemble and replace the rollers in the variator of the Sym Joyride 200 scooter, which is also applicable to…
How to Change the Engine Oil on a SYM Joyride 200 Scooter?
How to Change the Engine Oil on a SYM Joyride 200 Scooter?
Joyride 200 In this tutorial, we will see how to change the engine oil on a SYM Joyride 200 scooter, a very simple and quick operation. First, ensure that the en…
Instructions for Removing the Spark Plug on Sym Joyride 125
Instructions for Removing the Spark Plug on Sym Joyride 125
Joyride 125 In this video tutorial, learn how to remove the spark plug from a Sym Joyride 125 engine. First, remove the fixing screws of the plastic cover locate…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos