Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to change the engine oil on a SYM Joyride 200 scooter, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the scooter, locate the drain plug, and unscrew it using a 17mm socket. Allow all the oil in the system to drain out, remove the filter, and clean it of any dirt residue. At this point, simply reassemble everything and add the required amount of oil through the designated upper hole.

Posted on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rollers in the Variator of the Sym Joyride 200
Joyride 200 In today's video, you will see how to disassemble and replace the rollers in the variator of the Sym Joyride 200 scooter, which is also applicable to…
How do you disassemble the engine of the Sym Joyride 200?
How do you disassemble the engine of the Sym Joyride 200?
Joyride 200 In order to disassemble the engine of the Sym Joyride 200, you need to loosen the screws that secure it to the housing, so that all connectors and tu…

How to Remove the Handlebar Ends and Mirrors on the Royal Enfield Interceptor 650

This guide shows how to remove the handlebar ends and replace the mirrors on the Royal Enfield Interceptor 650. The first step is to unscrew the bolt holding the handlebar end in place using an Allen key. Once the bolt is removed, carefully pull out the finishing block. Take the replacement finishing block and, after loosening the fixing hex bolt, insert it into position and tighten it. Install the mirrors at the end of the element and tighten the mirror fixing bolt. Make the necessary adjustments to ensure proper rear visibility.

Watch the video!


by ScegliAuto

More videos