Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Sym
  4. : Joyride 125
In this video tutorial, learn how to remove the spark plug from a Sym Joyride 125 engine. First, remove the fixing screws of the plastic cover located under the seat and on the footboard; then access the engine head, where you will disconnect the spark plug cap. Now, unscrew the spark plug with a socket and remove it, replacing it with a new one of the correct type. Finally, reassemble it by inserting and hand-tightening before securing it with the socket; then reattach the scooter's fairing!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Joyride 200 In today's video, you will see how to disassemble and replace the rollers in the variator of the Sym Joyride 200 scooter, which is also applicable to…
Sport Rider 125 Today, let's go through the instructions for removing and replacing the spark plug on the Sym Sport Rider 125 scooter. First, place the scooter on it…
Orbit 125 This guide provides instructions on how to remove and replace the spark plug of the Sym Orbit 125 scooter engine. First, place your scooter on the ce…

How to Change the Speed Unit on the Piaggio Mp3

If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes.

Watch the video!


by ScegliAuto

More videos