Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, you will learn how to check the coolant level of the engine on the Sym VTS 200 scooter by following the instructions below. First, place the scooter on the centre stand and begin removing the plastic cover located at the top left under the handlebars. Then unscrew the cap of the radiator fluid reservoir and check that the level is at the maximum mark. If the level is too low, top up with new antifreeze suitable for your engine!

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Drive Belt on the Sym VTS 200
How to Replace the Drive Belt on the Sym VTS 200
Vts 200 Follow the steps necessary to remove and replace the drive belt on the Sym VTS 200 scooter. First, place your scooter on the centre stand and start u…
How to Replace the Spark Plug on a Sym VTS 200
How to Replace the Spark Plug on a Sym VTS 200
Vts 200 In today's video, you will see how to remove and replace the engine spark plug on a Sym VTS 200 scooter, as well as on other models from the manufact…
Where is the battery located in the SYM VTS 200 scooter?
Where is the battery located in the SYM VTS 200 scooter?
Vts 200 In this video we can see where the battery is located in the SYM VTS 200 scooter and how to proceed in case we need to replace it, a very simple and …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos