Do it yourself
| ||||
|
Model: Sym Allo 125
In order to replace the ignition switch of the Sym Allo 125, you need to loosen the screws that secure the inner part of the motorcycle's front fairing: these screws are located just below the handlebars. Once these have been loosened, you can remove the panel and proceed to loosen the screws that secure the ignition switch to its housing. This way, the ignition switch can be disconnected from the cables and completely removed, so that a new one can be inserted; after installation, you will need to verify that everything is functioning correctly.
Posted on 22 December 2023 by ScegliAuto
|
How do you replace the exhaust pipe of the KTM Duke 390?The exhaust pipe of the KTM Duke 390 can be replaced by loosening the screw that locks the connecting clamp, which connects the exhaust pipe to the remaining part of the exhaust duct. Then it will be possible to unscrew the bolt that fixes the exhaust pipe to its support at the back, so that it is completely released. When the piece is no longer constrained, it will be possible to remove it from its housing so that the new one can be inserted; the exhaust pipe must then be connected to the remaining part of the manifold with the corresponding clamp and fixed to the support at the back. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |