Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on the Sym Wolf 125, loosen the bolt that secures it to the corresponding side support, located at the bottom right of the rear mudguard. Once this bolt is loosened, you can widen the ring that connects the exhaust to its seat, allowing it to be completely released. At this point, you can fully remove the old exhaust from its seat, making way for the new replacement part; after installation, ensure that all components are properly secured and connected.

Updated on 23 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Wolf 125 In order to replace the battery of the Sym Wolf 125, you need to loosen the screws that secure the panel covering the side of the motorcycle, located…
Wolf 125 In order to disassemble the engine of the Sym Wolf 125, you will need to loosen the screws that hold it to its housing in the central lower part of t…
Wolf 125 Today we will explain how to replace the spark plug of a Sym Wolf 125 scooter on your own. We start by removing the internal seat using a 10mm key to…

How to Replace the Clutch Cable on the Royal Enfield Classic 350

In this guide, you will learn how to remove and replace the clutch cable on the Royal Enfield Classic 350 motorcycle. First, place your bike on the centre stand and begin unscrewing the adjuster located above the clutch cover on the left side; then detach the cable. Next, remove the cable from the clutch lever, pulling it out along with the outer casing. Now, replace it with the new, correct type, connecting the cable to the clutch lever. Finally, adjust the clutch to set the disengagement.

Watch the video!


by ScegliAuto

More videos