Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Sym
  4. : Jet 170 : How to change the engine oil of a SYM JET 170?

Model: Sym Jet 170
Part: Engine oil
How to change the engine oil of a SYM JET 170?

To change the motor oil of a SYM JET 170, make sure the scooter is on a flat and stable surface. Start the engine and let it run for a few minutes to heat up the oil, making it more fluid. Turn off the engine and locate the oil drain plug under the engine. Place a pan under the plug to collect the used oil. Use a wrench to unscrew the drain plug and let the oil drain completely. Once all the oil has drained out, securely screw back the drain plug. Locate the oil fill cap on the side of the engine and remove it. Using a funnel, slowly pour in the new oil, making sure to use the type and quantity recommended in the owner's manual. After adding the oil, replace the fill cap and start the engine for a few minutes to allow the oil to circulate. Turn off the engine and check the oil level with the dipstick, adding more if necessary. Make sure the oil level is correct before closing everything up and completing the process.


Posted on 23 May 2024 by ScegliAuto



How to change the engine oil of a SYM JET 170?
Jet 170 To change the motor oil of a SYM JET 170, make sure the scooter is on a flat and stable surface. Start the engine and let it run for a few minutes to
How do you change the engine oil of the Sym Jet X 150?
Jet X 150 In order to change the engine oil of the Sym Jet X 150 it is necessary to loosen the bolt located in the lower central part of the bike, immediately
How to change the gear oil on the Sym Jet 100
Jet 100 In this short video we will understand how to change the gear oil on the Sym Jet 100 scooter by following these simple steps. First of all, place the

Replacing the air filter of the Keeway RKF 125

In today's video tutorial we will see how to disassemble and replace the engine air filter of the Keeway RKF 124 motorcycle, in simple and quick steps. First we put the motorcycle on the stand and begin to disassemble and remove the passenger seat and then the driver's seat; then we go to remove the bracket and the cover of the air filter box, which we find next to the battery, as shown in the video. At this point we remove and replace the filter cartridge with the new one, inserting it in the correct direction; finally reassemble the driver's seat and the passenger seat!

Watch the video!


by ScegliAuto

More videos