Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Carburettor from the Sym Symphony Sport Rider 125

Model: Sym Sym Sport Rider 125i
Part: Carburetor

Video tutorial

In this brief and simple guide, follow the main steps to remove and replace the carburettor of the Sym Symphony Sport Rider 125 scooter. First, place the scooter on its centre stand and open the seat; then remove the under-seat compartment to access the carburettor, as shown in the video.

Next, loosen the screws of the metal clamp on the intake side, then remove the air duct; disconnect the carburettor cable and the fuel line to remove it, applying the reverse procedure for reassembly!


Updated on 13 October 2026 by ScegliAuto


Related tutorials

Sym Sport Rider 125i In this short and simple guide, discover how to perform routine maintenance by changing the engine oil and oil filter on the Sym Symphony SR 125 scoo…
Sym Sport Rider 125i In this tutorial, see how to remove the oil change light on the Sym Sport Rider 125i scooter. This is a very simple operation that should only be per…

How to Change the Engine Oil in the Triumph Tiger 1200 Rally Explorer

In this tutorial, you will see how to change the engine oil in the Triumph Tiger 1200 Rally Explorer, a very simple and quick operation. First, ensure that the engine is cool enough, then remove the lower protective cover, locate the drain hole bolt, and unscrew it using a 7mm hex key. Allow all the oil in the system to drain, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos