Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the Tata Nexon located?

Model: Tata Nexon MK 1 - Years 2017-2024
Part: Fuse box

If you don't know where the box containing all the fuses of your Tata Nexon is located, don't worry because in the following guide you will find the various steps you need to take to locate it in a few seconds and without any difficulty. First of all, open the driver's side door and enter the cabin, then make sure the car is turned off and locate the small compartment located in the lower area of the dashboard, next to the steering wheel. Finally, remove the cover with your own hands in order to access the fuses of your Tata Nexon.

Posted on 14 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear knob of the Tata Nexon.
How to replace the gear knob of the Tata Nexon.
Tata Nexon (2017-2024 / MK 1) For the DIY replacement of the gear knob on your Tata Nexon, simply follow the following procedure. First, enter the car, reach the driver's seat, an…
How do you reset the Service light of the Tata Nexon?
How do you reset the Service light of the Tata Nexon?
Tata Nexon (2017-2024 / MK 1) The procedure for resetting the Service light that appears on the instrument panel of the Tata Nexon can be done by inserting the ignition key into t…
Replacement of Tata Nexon remote control battery
Replacement of Tata Nexon remote control battery
Tata Nexon (2017-2024 / MK 1) When we open and close the door of the Tata Nexon, we see a red LED briefly flashing on the body of the remote control. If this does not happen, it m…

Other guides you may be interested in

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos