Do it yourself
Frequently asked questions about cars and motorcycles

How to check if the car engine cylinder head is not burnt

Model: Tata Tata Various
Part: Cylinder head

Video tutorial

Today we will explain a nice method to use to check that the engine head gasket is not burnt. What we need is a latex glove that must be placed over the gasket and closed on it with a clamp.

If the glove inflates when the engine is turned on, it means there is pressure in the cooling system, so it will be necessary to replace the gasket. To perform the replacement, we need to remove the engine.

After removing the engine, we must replace all the parts starting from the shock absorbers, passing through the hydraulic lifters, and then polishing the camshaft.


Posted on 21 July 2025 by ScegliAuto


Related tutorials

Tata Tata Various If the key fob for your Tata Harrier has stopped working, it is most likely due to a dead battery, so you will need to replace it. If you want to ope…
Tata Tata Various If you own a Tata Harrier, you must know the exact location of all the various fuses to intervene quickly and effectively in case of electrical fault…
Tata Tata Various The tyre pressure monitoring system (TPMS) warning light must be reset after inflating the tyres so that the control unit can register the correct pr…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos