Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Tata
    3. :
  3. Altroz
    4. : How to reset the Tata Altroz "Trip B" light

Tata Altroz - Video tutorial

Model: Tata Altroz MK 1 - Years 2020-2024
Part: -board computer
Operation: How to reset the Tata Altroz "Trip B" light

The "Trip B" warning light has the function of indicating the partial kilometers traveled on the on-board computer display of your Tata Altroz. To reset this light it is necessary to perform a short and simple procedure that we will show you below. First, insert the key and start the instrument panel without even starting the engine. Then press the "Mode" button (located to the left of the speedometer) several times until "Trip B" appears on the mini display. At this point, hold down the "Set" button for a few seconds and release it as soon as the reset is complete.


Posted on 8 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos