|
Do it yourself
| |||
| ||||
How to Perform Maintenance on the Rear Drum Brakes of the Tata Telcoline Tl
Model: Tata Telcoline Tl
MK 1
- Years:
1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999
Video tutorial
If you need to perform maintenance on the rear drum brakes of your vehicle, proceed as follows, also referring to the video: first, loosen the wheel lug nuts, then lift the car and remove the wheel. Since the drum brake cover is very rusted, to facilitate removal, use a penetrating spray and a hammer to tap the metal to loosen it. Use screwdrivers as levers. If you still cannot remove the cover, use bolts to screw into the free holes in the cover to push it outward. Once the cover is removed, you can perform the desired maintenance and then reassemble everything.
Updated on 20 May 2026 by ScegliAuto
Related tutorials
Tata Telcoline Tl
(2006-2022 /
MK 2)
Before you start driving the Tata Telcoline, make sure that all the main functions of the vehicle are in order. Especially if you need to drive on sl…
Tata Telcoline Tl
(1988-2024 /
MK 1)
In this guide, find out where to locate the engine number and the Vehicle Identification Number (VIN) of the Tata Telcoline in simple and quick steps…
Tata Telcoline Tl
(2006-2022 /
MK 2)
In this video, you will learn how to change the power steering fluid in the Tata Telcoline TI. First, make sure it is really necessary to add power s…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |