Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Nanny Zest service light

Model: Tata Zest MK 1 - Years 2014-2019
Part: Service warning light

In the following guide dedicated to all owners of the Tata Zest car model we will find out how to manually reset the car service light without using a diagnostic tool. First, you need to insert the key and turn on the car ignition. Immediately after, locate the "Mode" button located in the center of the panel and press it several times until you see the item relating to the kilometers missing for maintenance. At this point, keep the "Set" button pressed and release it as soon as the display starts flashing. Finally, hold it down again for a few seconds and release it when the reset is complete.

Posted on 9 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How do I reset the Tata Zest Service light?
How do I reset the Tata Zest Service light?
Tata Zest (2014-2019 / MK 1) In order to reset the Tata Zest Service warning light, you need to turn on the instrument panel and press the MODE button, until the Service item app…
How do you reset the Service light of the Tata Zest?
How do you reset the Service light of the Tata Zest?
Tata Zest (2014-2019 / MK 1) In order to reset the Service light of the Tata Zest, you will need to turn on the instrument panel by turning the ignition key inside the ignition s…
How to reset the service in Tata Zest?
How to reset the service in Tata Zest?
Tata Zest (2014-2019 / MK 1) As we can see in this tutorial, resetting the service in Tata Zest is a very simple and fast operation. We will of course need to complete all requir…

How to Replace the Boot Compartment Light Bulb on a Peugeot 208

If you want to improve visibility inside the boot compartment, it is recommended to replace the original incandescent bulb with a LED type (T10 fitting); once the rear hatch is opened, locate the bulb holder positioned on the side, near the shock absorber dome, where the plastic grille is located. Then, lever the retaining tab to extract the bulb holder, disconnect the power connector, and remove the old bulb to replace it with the LED one; reconnect the power, check the correct operation of the bulb (if not, rotate it 180°), and reposition the bulb holder in its place.

Watch the video!


by ScegliAuto

More videos