Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Ambient Lights on a Tata Altroz

Model: Tata Altroz MK 1 - Years 2020-2026
Part: Body

How to install very appealing ambient lights on a Tata Altroz. First, you need to remove the interior trim from the doors. To do this, remove the hidden screws and then take out the plastic clips that hold the handles and especially the two-tone panels. Be very careful as it will come off in one piece. Now, you will need to run the wire that will illuminate the bottle holder, which you will install in the driver's side door pocket. Pass the wire through the door until you connect it to the handle, and run it under the carpet to the rear door and to the trunk where you will connect it to the electrical system.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Radio in a Tata Altroz?
How to Replace the Radio in a Tata Altroz?
Tata Altroz (2020-2026 / MK 1) To replace the radio in a Tata Altroz, use a tool to pry off the panel located above the instrument cluster. Once removed, unscrew the screws underne…
How to Replace the Door Panel on a Tata Altroz?
How to Replace the Door Panel on a Tata Altroz?
Tata Altroz (2020-2026 / MK 1) To replace the door panel on a Tata Altroz, use a tool to pry the window switch panel from its housing. Once the switch panel is removed, detach the …
How to Check the Engine Oil Level in a Tata Altroz
How to Check the Engine Oil Level in a Tata Altroz
Tata Altroz (2020-2026 / MK 1) In this video tutorial, learn how to check the engine oil level in a Tata Altroz by following the instructions below. First, open the hood and remove…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos