Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Tata
  4. :
  5. Altroz
  6. : How do I replace the headlight bulb on the Tata Altroz?

Tata Altroz - Video tutorial

Model: Tata Altroz MK 1 - Years 2020-2024
Part: Headlight bulb
Operation: How do I replace the headlight bulb on the Tata Altroz?

In order to replace the headlight bulb of the Tata Altroz you have to open the hood so that you can access the components inside the engine compartment; in particular, it will be necessary to access the rear part of the headlight corresponding to the bulb to be replaced. After this has been removed and disconnected from the connector, it will be possible to go and connect the new bulb to the same connector, so that it can be inserted inside the headlight. After installation, the hood must be closed, checking that the bulb just installed works correctly.


Posted on 14 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos