Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Tata Altroz?

Model: Tata Altroz MK 1 - Years: 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

Video tutorial

As shown in this tutorial, replacing the cabin filter in a Tata Altroz is an extremely simple and quick operation. First, sit in the driver's seat, then go under the dashboard and locate the long rectangular cover at the junction with the center tunnel.

Next, unscrew the indicated fastening screw with a Phillips screwdriver, remove the old filter, and clean the inside of the housing from any dirt residue. Finally, install the replacement by following the exact reverse procedure.


Updated on 13 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Tata Altroz?
How to Replace the Air Filter on a Tata Altroz?
Tata Altroz (2020-2026 / MK 1) To replace the air filter on a Tata Altroz, open the hood to access the components inside the engine compartment. Here, loosen the screws that secure…
How to Replace the Headlight Bulb on a Tata Altroz
How to Replace the Headlight Bulb on a Tata Altroz
Tata Altroz (2020-2026 / MK 1) To replace the headlight bulb on a Tata Altroz, open the hood to access the components inside the engine compartment. Specifically, you need to reach…
How to Replace the Cabin Air Filter on the Tata Altroz
How to Replace the Cabin Air Filter on the Tata Altroz
Tata Altroz (2020-2026 / MK 1) If you want to tackle the replacement of the cabin air filter on this vehicle, you will find the instructions in this description, and you can also r…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos