Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Shoes on a Tata Winger?

Model: Tata Winger MK 1 - Years 2007-2019
Part: Brake drums and shoes

To replace the rear brake shoes on a Tata Winger, lift the rear of the vehicle so it is not in contact with the ground. Then, loosen the wheel and drum fastening screws to access the shoes underneath. Remove them from their mechanism by taking off the retaining clips from the cylinder. This will allow you to insert the new shoes, securing them properly. After installation, remount the corresponding wheel and drum.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter in a Tata Winger Van?
How to Replace the Diesel Filter in a Tata Winger Van?
Tata Winger (2007-2019 / MK 1) In this tutorial, we will see how to replace the diesel filter in a Tata Winger van, an extremely simple and quick operation. First, ensure that the …
How to Renew the Headlights of the Tata Winger?
How to Renew the Headlights of the Tata Winger?
Tata Winger (2007-2019 / MK 1) In this video, you can see how to renew the headlights of the Tata Winger, but keep in mind that the time required to perform this operation is signi…
How to Replace the Front Wheel Bearing on the Tata Winger?
How to Replace the Front Wheel Bearing on the Tata Winger?
Tata Winger (2007-2019 / MK 1) To replace the front wheel bearing on the Tata Winger, lift the vehicle with a jack so that the corresponding wheel is not in contact with the ground…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos