Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wheel Bearing on the Tata Winger?

Model: Tata Winger MK 1 - Years 2007-2019
Part: Bearing

To replace the front wheel bearing on the Tata Winger, lift the vehicle with a jack so that the corresponding wheel is not in contact with the ground. Then, remove the bolts that secure it to the hub, allowing the hub to be removed by unscrewing its mounting bolts. Once the hub is detached from the axle, push the bearing located at its center to remove it from its housing and replace it with a new one. After the replacement, reinstall all components.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Shoes on a Tata Winger?
How to Replace the Rear Brake Shoes on a Tata Winger?
Tata Winger (2007-2019 / MK 1) To replace the rear brake shoes on a Tata Winger, lift the rear of the vehicle so it is not in contact with the ground. Then, loosen the wheel and dr…
How to Replace the Diesel Filter in a Tata Winger Van?
How to Replace the Diesel Filter in a Tata Winger Van?
Tata Winger (2007-2019 / MK 1) In this tutorial, we will see how to replace the diesel filter in a Tata Winger van, an extremely simple and quick operation. First, ensure that the …
How to Renew the Headlights of the Tata Winger?
How to Renew the Headlights of the Tata Winger?
Tata Winger (2007-2019 / MK 1) In this video, you can see how to renew the headlights of the Tata Winger, but keep in mind that the time required to perform this operation is signi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos