Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Rear Wheel Bearing on a Tata Bolt

Model: Tata Bolt MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Bearing

Video tutorial

In this brief and simple guide, discover how to disassemble and replace the rear wheel bearing of the drum on a Tata Bolt. First, lift the vehicle at the rear and begin removing the wheel; then remove the small center cover of the drum using a socket wrench, as shown in the video.

At this point, extract the old bearing from the drum; clean the seat and install the new bearing until it is fully seated.

Now reassemble everything by following the reverse procedure!


Updated on 16 July 2026 by ScegliAuto


Related tutorials

Tata Bolt (2014-2019 / MK 1) In this guide, you will discover how to remove and replace the rear wheel bearing of the Tata Bolt. First, lift the vehicle, even just the rear part,…
Tata Bolt (2014-2019 / MK 1) In this new guide for all of you with a Tata Bolt, we will discover the steps to correctly replace the small battery inside the key. First, get a sma…
Tata Bolt (2014-2019 / MK 1) The procedure to reset the service light is the same for several Tata vehicles: Bolt, Tiago, Tigor, and Zest. After performing the maintenance, turn …

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos