Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Tata
    3. :
  3. Bolt
    4. : How to reset the service on the Tata Bolt?

Tata Bolt - Video tutorial

Model: Tata Bolt MK 1 - Years 2014-2019
Part: Checks and maintenance
Operation: How to reset the service on the Tata Bolt?

The procedure for resetting the service light is the same for several Tata vehicles: Bolt, Tiago, Tigor and Zest. After having done the coupon, turn on the instrument panel of our Tata Bolt and press the "set" button located below the display on the dashboard and hold it down until the number shown on the display starts flashing: at this point release it and press it again until the number in question disappears from the display. In this way we have reset the service warning light which will go off and then come on again when it's time for a new service.


Posted on 12 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos